Norfolk Street Cruisers .
Club Cars , Keith
If you are ready we will try and follow another Model 'A' build, this one is Keith's, not satisfied with the 32 3Window coupe he has acquired a 1931 tudor sedan to rebuild
15.09.13
Still buying parts, this years swap meet, Old Warden and the NATS saw the aquisition of front spindles along with disc's and calipers. the front radius rods have have their bungs welded in to take the joints. progress on cleaning and setting the chassis height is slow
03.04.12
Post swap meet Keith has been spending money we picked up ladder bars for the rear suspension and I convinced him to buy an off the shielf crossmember to make like easier. we also managed to get a front beam, the 46" wide 4"drop Superbell
24.09.11
The plan so far, low but fully fendered, full height roof 16" rear wheels on plain steel wheels. 2.8L v6 inline with a tremec 5 speed leading to a mavrick 8" ford rear axle. Rear axle will be supported by coil over shocks and located by a pair of ladder bars while the front will be a drop beam and original split wishbones. Paint will be plain with a recaro based interior.
|
|
|
look like a lot of work just to make the shell and chassis usable
 |
 |
 |
A few picks as strip down begins and a plan for the build is outlined
 |
 |
 |
Picking up the project car on a iffy at best trailer but it's only a light car, no engine or gearbox helps